Feature
7000 kg rated capacity
300 mm fork width
300 mm fork length
Integrated hydraulic pump
Controllable fork lowering
180-degree turning angle
Ergonomic handle design
Simplified spare-parts design
DELTALIFT 7 Ton Forklift Jack
Compact manual pallet handling with a 7000 kg capacity, 300 mm fork width and 300 mm fork length.
Hydraulic 300 mm
DELTALIFT 7 Ton Forklift Jack Keep your forklift working instead of sitting in a workshop queue. The DELTALIFT 7 Ton Forklift Jack lifts the mast end of your machine on site, so you can get to tyres, forks, and undercarriage work without booking a bay or waiting on a mobile crane. Built on a heavy duty X-frame with a hydraulic ram, it takes a 7 ton load on a wide, stable base that won't tip under the mast. Two castor wheels at the base let one person roll it into position and steer it under load. A safety chain locks the ram once you've lifted, so the jack holds the weight instead of relying on the seal alone. Pump it up with the long handle. No compressor, no power point, just leverage, so it works as well in the yard as it does on a breakdown call anywhere on site.
7000 kg
LOAD CAPACITY
300 mm
FORK WIDTH
300 mm
FORK LENGTH
Availability and configuration are confirmed during quotation. Model selection should be based on the actual load, load centre, aisle or yard space, lifting height and duty cycle.
Product Overview
<meta charset="utf-8" />
DELTALIFT 7 Ton Forklift Jack
Keep your forklift working instead of sitting in a workshop queue. The DELTALIFT 7 Ton Forklift Jack lifts the mast end of your machine on site, so you can get to tyres, forks, and undercarriage work without booking a bay or waiting on a mobile crane.
Built on a heavy duty X-frame with a hydraulic ram, it takes a 7 ton load on a wide, stable base that won't tip under the mast. Two castor wheels at the base let one person roll it into position and steer it under load. A safety chain locks the ram once you've lifted, so the jack holds the weight instead of relying on the seal alone.
Pump it up with the long handle. No compressor, no power point, just leverage, so it works as well in the yard as it does on a breakdown call anywhere on site.
Why it matters
Provides a clearly defined load limit for routine pallet handling.
The catalogue positions this width for standard pallets and tighter aisle space.
Provides support length for many common pallet formats.
The catalogue describes the pump as non-leaking and low-maintenance.
Allows the operator to regulate lowering speed.
Provides a wide steering range for manual manoeuvring.
Provides a defined hand position and conveniently placed control-chain hole.
The catalogue positions the design as easier to repair and maintain.
Practical outcome
Supports movement of suitable standard pallet loads within the rated capacity.
Helps match the truck to compatible pallets where manoeuvring space is limited.
Allows full fork entry where the pallet dimensions are compatible.
Supports manual lifting without an external power source.
Supports more precise placement of the load.
Helps the operator position the pallet jack in confined working areas.
Supports routine manual handling and control of the unit.
Can support serviceability, subject to parts availability and maintenance practice.
DELTALIFT 7 Ton Forklift Jack can be considered for suitable applications such as:
- Lifting forklifts for tyre changes and wheel repairs
- Raising forklifts to inspect or service brakes, axles and undercarriage components
- Workshop maintenance on counterbalance, reach and warehouse forklifts
- Supporting routine servicing in warehouses, factories and fleet workshops
- Lifting other low-clearance industrial equipment where a standard floor jack will not fit
Suitability note:
The catalogue also lists construction-site material movement as an application. Actual suitability depends on having a level, firm and appropriate operating surface. Confirm the pallet type, load distribution, floor condition, gradients, operating temperature and required manoeuvring space before selection.
Selection factor
Load
Pallet fit
Lift range
Operating environment
Catalogue value / guidance
Up to 7000 kg
300 mm fork width; 300 mm fork length
Maximum fork height 200 mm
Compact manual truck; 180-degree turning angle
Confirm before order
Maximum pallet weight and load distribution
Pallet width, fork-entry spacing and deck arrangement
Verified minimum fork height and required pallet entry height
Floor surface, gradients, temperature and aisle space
Why it matters
Keeps the application within the rated capacity.
Confirms that the pallet can be supported correctly by the forks.
Ensures the forks can enter and lift the intended pallet.
Confirms that the truck can be manoeuvred safely in the intended area.
Specification / Unit
Load capacity / kg
Fork width (W) / mm
Fork length (L) / mm
Maximum fork height / mm
Minimum fork height / mm
Truck wheel - rear roller / mm
Truck wheel - load roller / mm
Truck weight / kg
Turning angle
520 mm Pallet Jack
7000
300
300
200
Catalogue narrative: 80; table shows “7” - confirm
180 x 62
78 x 100
67
180°
Configuration
<meta charset="utf-8" />
The catalogue describes the 300 mm model with an integrated hydraulic pump, ergonomic handle, controllable fork lowering, 180-degree turning angle, 180 x 62 mm rear rollers and 78 x 100 mm load rollers. The illustrated unit also carries TÜV/GS marks, and the catalogue states that it is TÜV/GS certified.
No alternative fork widths, wheel materials, brake options or other variants are defined in this catalogue. Any delivery arrangements, optional equipment, servicing support, spare-parts availability or alternative pallet-jack models should therefore be confirmed in the quotation rather than assumed to be included.
Safety and Operating Suitability
<meta charset="utf-8" />
The Forklfit jack only within its 7000 kg rated capacity and only with pallets and loads that are compatible with the fork dimensions and load-support arrangement. Loads should be stable and correctly positioned before movement or lowering. Operate only on surfaces and gradients approved for the supplied unit, and follow the applicable operating and site-safety procedures.
The catalogue states that the fork lowering speed is controllable and that the unit is TÜV/GS certified. Do not add unverified claims about other standards, temperature limits, gradient capability or wheel suitability. The minimum fork-height discrepancy should be resolved before final publication so that users receive one verified specification.
Move Pallets with the DeltaLift 520 mm Hydraulic Hand Pallet Jack
Confirm your pallet dimensions, load weight and operating environment, then request a quotation for the 2.5-ton manual pallet jack.